JVC KD-R951BT Manuel D'instructions page 16

PRO EQ 1 USER1/ USER2: Select a preset name.
2 BASS / MIDDLE / TREBLE: Select a sound tone.
(for
KD-R852BT / 3 Adjust the sound elements of the selected sound tone.
KD-R851BT) BASS Frequency: 60/ 80/ 100/ 200 Hz
Level:
Q:
MIDDLE Frequency: 0.5/ 1.0/ 1.5/ 2.5 kHz
Level:
Q:
TREBLE Frequency: 10.0/ 12.5/ 15.0/ 17.5 kHz Default: (10.0 kHz)
Level:
Q:
1 USER1/ USER2: Select a preset name.
PRO EQ
(for 2 BASS / MID BASS / MID / MID HIGH / HIGH: Select a sound tone.
KD-R951BT) 3 Adjust the sound elements of the selected sound tone.
BASS Frequency: 63/ 80/ 100/ 125 Hz
Level:
Q:
MID BASS Frequency: 200/ 250/ 315/ 400 Hz
Level:
Q:
MID Frequency: 630/ 800 Hz/ 1.0/ 1.25 kHz Default: (800 Hz)
Level:
Q:
MID HIGH Frequency: 2.0/ 2.5/ 3.15/ 4.0 kHz
Level:
Q:
HIGH Frequency: 6.3/ 8.0/ 10.0/ 12.5 kHz
Level:
Q:
AUDIO
BASS BOOST +01 / +02: Selects your preferred bass boost level. ; OFF: Cancels.
LOUD 01 / 02: Boosts low or high frequencies to produce a well-balanced sound at
low volume. ; OFF: Cancels.
14
Default: (80 Hz)
–06 to +06
Q1.0/ Q1.25/ Q1.5/ Q2.0
Default: (1.0 kHz)
–06 to +06
Q0.75/ Q1.0/ Q1.25
–06 to +06
Q FIX
Default: (80 Hz)
–10 to +10
Q1.0/ Q1.25/ Q1.5/ Q2.0
Default: (250 Hz)
–10 to +10
Q1.0/ Q1.25/ Q1.5/ Q2.0
–10 to +10
Q0.75/ Q1.0/ Q1.25/ Q2.0
Default: (2.5 kHz)
–10 to +10
Q0.75/ Q1.0/ Q1.25/ Q2.0
Default: (8.0 kHz)
–10 to +10
Q0.75/ Q1.0/ Q1.25/ Q2.0
SUB.W LEVEL * 1
–08 — +08 (00): Adjusts the subwoofer output level.
SUB.W * 2
ON / OFF: Turns on or off the subwoofer output.
SUB.W LPF *
1
THROUGH: All signals are sent to the subwoofer. ; LOW 55Hz /
MID 85Hz / HIGH 120Hz: Audio signals with frequencies lower than
(00)
55 Hz/ 85 Hz/ 120 Hz are sent to the subwoofer.
(Q1.0)
HPF * 3
OFF: All signals are sent to the front/rear speakers. ; LOW 100Hz /
(00)
MID 120Hz / HIGH 150Hz: Audio signals with frequencies lower than
(Q1.25)
100 Hz/ 120 Hz/ 150 Hz are cut off from the front/rear speakers.
FADER * *
4 5
R06 — F06 (00): Adjusts the front and rear speaker output balance.
(00)
(Q FIX)
BALANCE * 4
L06 — R06 (00): Adjusts the left and right speaker output balance.
VOL ADJUST –05 — +05 (00): Presets the volume adjustment level of each source
(compared to the FM volume level). Before adjustment, select the source
you want to adjust. ("VOL ADJ FIX" appears if FM is selected.)
AMP GAIN LOW POWER: Limits the maximum volume level to 30. (Select if the
(00)
maximum power of each speaker is less than 50 W to prevent damaging
(Q1.25)
the speakers.) ; HIGH POWER: The maximum volume level is 50.
(00)
D.T.EXP ON: Creates realistic sound by compensating the high-frequency
(Q1.25)
(Digital Track components and restoring the rise-time of the waveform that are lost in
Expander) audio data compression. ; OFF: Cancels.
(00)
L/O MODE *
6
SUB.W / REAR: Selects whether rear speakers or a subwoofer are
(Q1.0)
connected to the REAR/SW line out terminals on the rear panel (through an
external amplifier).
(00)
(Q1.0) * 1
For KD-R852BT / KD-R851BT: Displayed only when [L/O MODE] is set to
[SUB.W] and [SUB.W] is set to [ON].
(00) * 2
For KD-R852BT / KD-R851BT: Displayed only when [L/O MODE] is set to
(Q1.0)
[SUB.W].
*
3 For KD-R951BT.
* 4
This adjustment will not affect the subwoofer output.
* 5
If you are using a two-speaker system, set the fader level to [00].
*
6 For KD-R852BT / KD-R851BT.
AUDIO SETTINGS