JVC KD-R951BT Manuel D'instructions page 13

Bluetooth mode operations
1 Press to enter Bluetooth mode.
2
Turn the volume knob to make a selection (see the following
table), then press the knob.
3 Press MENU to exit.
To return to the previous setting item or hierarchy, press G T/P.
1 Press the volume knob to select a name or a phone number.
RECENT CALL
• ">" indicates call received, "<" indicates call made, "M"
indicates call missed.
• "NO HISTORY" appears if there is no recorded call history or call
number.
2 Press the volume knob to call.
1 Turn the volume knob to select a name, then press the knob.
PHONEBOOK
2 Turn the volume knob to select a phone number, then press the
knob to call.
• If the phone supports PBAP, the phonebook of the connected
phone is automatically transferred to the unit when pairing. If the
phone does not support PBAP, "SEND P.BOOK MANUALLY" appears.
Transfer the phonebook manually. ( 13, P.BOOK WAIT)
• This unit can display only non-accent letters. (Accent letters such as
"Ú" is showns as "U".)
• If the phonebook contains many contacts, ( 12, Select a
contact by name).
1 Turn the volume knob to select a number (0 to 9) or character ( ,
DIAL NUMBER
#, +).
2 Press S / T to move the entry position.
1
Repeat steps
3 Press the volume knob to call.
VOICE Speak the name of the contact you want to call or the voice command
to control the phone functions. ( Use Voice Recognition)
2
and until you finish entering the phone number.
SETTINGS
AUTO ANSWER 01 SEC — 30 SEC: The unit answer incoming call automatically in the
selected time (seconds). ; OFF: Cancels.
RING TONE IN UNIT: The unit rings to notify you when a call/text message comes in.
(Default ring tone is different according to the paired device.)
• CALL: Selects your preferred ring tone (TONE 1 — 5) for incoming calls.
• MESSAGE: Selects your preferred ring tone (TONE 1 — 5) for incoming
text messages.
IN PHONE: The unit uses the connected phones' ring tone to notify you
when a call/text message comes in. (The connected phone will ring if it does
not support this feature.)
RING COLOR COLOR 01 — COLOR 29 (COLOR 06): Display zone will change to the
(for KD-R951BT) selected color during a call or when a text message comes in. ; OFF : Cancels.
MSG NOTICE * ON: The unit rings and "RCV MESSAGE" appears to notify you of an incoming
text message. ; OFF: Cancels.
* Functionality depends on the type of the phone used.
Text message notification
When the phone receives a text message, the unit rings and "RCV MESSAGE"
appears.
• You cannot read, edit, or send a message through the unit.
• To clear the message, press any button.
Use Voice Recognition
1 Press and hold .
The connected phone (which has been paired the earliest) is activated.
However, if priority device is connected, pressing and holding
activate the priority device. ( 12, PRIORITY)
2
Speak the name of the contact you want to call or the voice command
to control the phone functions.
• Supported Voice Recognition features vary for each phone. Refer to the
instruction manual of the connected phone for details.
• This unit also supports the intelligent personal assistant function of iPhone.
BLUETOOTH®
Default: XX
ENGLISH | 11