Function Description - Pontec PondoMatic Notice D'emploi

Masquer les pouces Voir aussi pour PondoMatic:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

- EN -
Translation of the original Operating Instructions
Information about these operating instructions
You made a good choice with the purchase of this product PondoMatic.
Prior to commissioning the unit, please read the instructions of use carefully and fully familiarise yourself with the unit.
Ensure that all work on and with this unit is only carried out in accordance with these instructions.
Adhere to the safety information for the correct and safe use of the unit.
Keep these instructions in a safe place! Please also hand over the instructions when passing the unit on to a new
owner.
Symbols used in these instructions
GB
The symbols used in this operating manual have the following meanings:
Risk of injury to persons due to dangerous electrical voltage
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate
measures are not taken.
Risk of personal injury caused by a general source of danger
This symbol indicates an imminent danger, which can lead to death or severe injuries if the appropriate
measures are not taken.
Important information for trouble-free operation.
 A
Reference to a figure, e.g. Fig. A.
Reference to another section.
Product Description
Delivery scope and unit configuration
The parts included in the scope of delivery are inside the container and have to be removed first!
How to proceed:
 A
Undo the side locking clips and remove the motor housing.
Take all loose parts out of the container.
Replace the motor housing and close the locking clips.
 A
PondoMatic
1
Motor housing
2
ON/OFF switch
3
Container
4
Locking clip
5
Inlet, suction hose connection
6
Outlet, drain hose connection
7
Suction hose
8
Drain hose
9
Extension tube
10
Adjustable universal nozzle
− Nozzle fully open (10 mm): Suitable for pond liner, no pebbles at the bottom of the pond, thick layer of sludge
− Nozzle closed (2 mm): Suitable for pond liner, layer of pebbles at the bottom of the pond, thick layer of sludge
11
Algae nozzle
12
Crevice nozzle

Function description

PondoMatic is a special pond vacuum for removing sludge from ponds and pools.
• High performance vacuum with 1400 watt motor.
• Switches over automatically between suction and emptying mode.
• The delivery scope includes:
– Crevice nozzle, algae nozzle and universal nozzle (adjustable from 2 to 10 mm).
– 4 m suction hose and 2 m drain hose
- EN -
Quantity
1
1
1
2
1
1
1
1
4
1
1
1
9

Publicité

Table des Matières
loading

Table des Matières