Construction Features; Materials Of Construction; Specifications & Technical Data - DeVilbiss TEKNA Pro Lite PRO-470 Fiche Technique

TB-1020

Construction Features

1 Air Cap (nickel plated brass for long durability)
2 Air Cap Retaining Ring (allows easy rotation of air cap)
3 Fluid Nozzle (not visible, ideal for automotive topcoat systems)
4 Fluid Needle (not visible)
5 Fluid Inlet (3/8 BSP thread – accepts TEKNA & DeVilbiss cups)
6 Air Inlet (universal thread, accepts G 1/4 & 1/4 NPS)
7 Self Adjusting Needle Packing (packing not visible, for long packing life)
8 Trigger (ergonomic for comfort)
9 Trigger Stud & Screw (easy replacement design)
10 Fan Air Adjustment (stepless regulation for flat to round spray)
11 Fluid Adjustment (stepless regulation of fluid volume)
12 Removable Spray Head (not visible, for long gun service life)
13 Interchangeable Colour ID System (4 coloured rings supplied)
14 Forged gun body (ergonomic, good looking & durable, easy to clean)
15 900cc Aluminium Cup (easy clean) (shown) or 20 oz. Acetal Cup (waterbourne) (not shown)
16 Push On Lid w/Drip Free Vent (disposable/easy clean design) (aluminum cup) or screw-on lid w/vent (acetal Cup)
17 Air Valve (not visible) (design offers low pull force & low pressure drop)
18 Gun acceptable for waterborne and solvent borne applications

Materials of Construction

Gun Body
Air Cap
Fluid Nozzle, Fluid Needle, Fluid Inlet, Trigger Stud
Spray Head, Air Cap Retaining Ring, Knobs
Springs, Clips, Screws
Seals, Gaskets
Trigger
Handle Plug, Air Inlet, Body Bushing, Spreader Valve Body, Air Valve Nut
Air Valve Assembly
Specifications & Technical Data
Air Supply Connection
Maximum Static Air Inlet Pressure
Nominal Gun Air Inlet Pressure for HVLP Models (with gun triggered)
Nominal Gun Air Inlet Pressure for High Efficiency Models – TE20 cap (with gun triggered)
Nominal Gun Air Inlet Pressure for High Efficiency Models – TE10 cap (with gun triggered)
Air Consumption
Fluid Supply Connection
Service Temperature
Gun Weight (gun only)
4
3, 4, 12
5
2
1
7
8
17
16
15
9
10
11
14
13
6
Anodized QuickClean®aluminium
Nickel plated brass
Stainless steel
Anodized aluminium
Stainless steel
Solvent resistant
Chrome plated steel
Chrome plated brass
Aluminum
Universal 1/4" BSP and 1/4" NPS
P1 = 12 bar (175 psi)
1.6 bar (24 psi)
1.8 bar (26 psi) (for compliance)
2.4 bar (35 psi) (for compliance)
See Chart 1 on page 11
3/8" BSP
0 to 40°C (32 to 100°F)
420g (14.8 oz.)