Safety General Regulations; Application; Norms And Regulations - Rendamax R40 Notice D'installation Et D'emploi

Safety
General regulations

Application

Norms and regulations

General regulations
This documentation contains important
information, which is a base for safe
and reliable installation, commissioning
and operation of the R40 boiler. All
activities described in this document
may only be excecuted by authorized
companies.
Changes to this document may be ef-
fected without prior notice. We accept
no obligation to adapt previously deliv-
ered products to incorporate such
changes.
Only original spare parts may be used
when replacing components on the
boiler, otherwise warranty will be void.
Application
The R40 boiler may be used for heating
and hot water production purposes
only. The boiler should be connected to
closed systems with a maximum tem-
perature of 100ºC (high limit tempera-
ture), maximum setpoint temperature is
90ºC.
Norms and regulations
When installing and operating the
boiler, all applicable norms (european
and local) should be fulfilled:

Local building regulations for install-
ing combustion air and flue gas sys-
tems;

Regulation for connecting the boiler to
the electrical appliance;

Regulations for connecting the boiler
to the local gas network;

Norms and regulations according to
safety equipment for heating systems;

Any additional local laws/regulations
with regard to installing and operating
heating systems.
The R40 boiler is CE approved and
applies to the following European
standards:

92 / 42 / EEC
Boiler efficiency directive

2009 / 142 / EEC
Gas appliance directive

2006 / 95 / EEC
Low voltage directive

2004 / 108 / EEC
EMC directive

EN 483
Gas-fired central heating boilers -
Type C boilers of nominal heat input
not exceeding 70 kW

EN 15420
Gas-fired central heating boilers -
Type C boilers of nominal heat input
exceeding 70 kW, but not exceeding
1000 kW

EN 15417
Gas-fired central heating boilers -
Specific requirements for condensing
boilers with a nominal heat input
greater than 70 kW but not exceeding
1000 kW

EN 50165
Electrical equipment of non-electric
appliances for household and similar
purposes - Safety requirements

EN 15502-1
Gas-fired central heating boilers -
Part 1: General requirements and
tests

EN 55014-1 (2000)
Electromagnetic compatibility - Re-
quirements for household appliances,
electric tools and similar apparatus -
Part 1: Emission

EN 55014-2 (1997)
Electromagnetic compatibility - Re-
quirements for household appliances,
electric tools and similar apparatus -
Part 2: Immunity - Product family
standard

EN 61000-3-2 (2000)
Electromagnetic compatibility (EMC) -
Part 3-2: Limits - Limits for harmonic
current emissions (equipment input
current 16 A per phase)

EN 61000-3-3 (2001)
Electromagnetic compatibility (EMC) -
Part 3-3: Limitation of voltage
changes, voltage fluctuations and
flicker in public low-voltage supply
systems, for equipment with rated
current 16 A per phase and not sub-
ject to conditional connection

EN 60335-1 (2002)
Household and similar electrical appli-
ances - Safety - Part 1: General re-
quirements

EN 60335-2-102 (2006)
Household an similar electrical
appliances: Particular requirements
for gas, oil and solid-fuel burning ap-
pliances having electrical connections
Additional national standards
Germany:

RAL - UZ 61 / DIN 4702-8
Switzerland:

SVGW

Vorschriften der kantonalen Instanzen
(z.B. Feuerpoilizeivorschriften)
Netherlands:

GASKEUR BASIS

GASKEUR SV

GASKEUR HR107
Belgium:

HR TOP
3