SPORTSTECH EX400 Mode D'emploi page 39

Step 2 ATTACH THE SEAT AND SEAT POST
•
Remove the pre-assembled nylon nuts (22) and flat washer (33) from back of the
seat (36). Fix the seat (36) with the top seat sliding bracket (35) and fasten with
nylon nut (22) and flat washer (33).
•
Remove the pre-assembled M10 knob (32) and flat washer (33) from back of the
seat sliding bracket (35). Fix the seat sliding bracket (35) with the top bracket of seat
tube (31) and fasten with M10 knob (32) and flat washer (33).
•
Attach seat tube (31) into the main frame (26) and secure in right position with the
seat post quick release knob (29). Adjust the height of seat by choosing the hole of
seat tube.
NOTE: When you adjust the height of seat DO NOT pull out the seat tube over the
warning line "MAX" which showing on the tube.
39