Honeywell PRO 1000 Serie Mode D'emploi page 14

Operating Manual
In case of difficulty
Make sure heating and cooling temperatures are set to acceptable ranges:
Temperature
settings do not
change
"Heat On" or
"Cool On" is
flashing
"Heat On" is not
displayed
"Cool On" is not
displayed
69-2607EFS—01
• Heat: 40° to 90°F (4.5° to 32°C).
• Cool: 50° to 99°F (10° to 37°C).
• Compressor protection feature is engaged. Wait 5 minutes for the system
to restart safely, without damage to the compressor (see page 8).
• Set the System switch to Heat, and set the temperature level above the
current room temperature (see page 5).
• Set the System switch to Cool, and set the temperature level below the
current room temperature (see page 5).
12