2. Press
or
Note: High power (2 watts) is only available on channels 1-7 and
15-22. Channels 8-14 are restricted to Low power (0.5 watts)
only, in accordance with governmental regulation.
3. Press the PTT button to exit the menu.
High power is indicated on the main display (indicated by "HI") when
channels 1-7 or 15-22 are selected.
Note: The power setting does not affect the ability of the radio to
receive transmissions. Only the output power is affected by this setting.
ADDITIONAL FEATURES
Keypad Tone On/Off
Press and hold the
keypad tone off or back on.
Roger Tone On/Off
Press and hold the
roger beep (PTT transmit beep) off or back on.
Automatic Power Saving
This feature turns off the display automatically when not in use to
save battery life.
Water Activated LED
If the radio is dropped in water, a flashing white LED light will be
activated automatically to assist in finding the dropped radio in
darkness. After retrieving the radio, press any button to
deactivate the flashing light.
to select the flashing "HI" or "LO" power.
button while turning the radio on to turn the
button while turning the radio on to turn the
12