Mountain Lab Gear SCOUT 2W Manuel De L'utilisateur page 12

Dual Channel Monitor (2CH)
Dual channel monitor allows the user to listen for transmissions
on two channels at the same time—the main channel and
sub-code as set on in the main menu, and a second channel
and sub-code.
1. Press the
"2CH" appears. The flashing number indicates the current
secondary channel to be monitored (1-22), and "OF"
indicates that the feature is turned off.
2. Press or
monitor.
Note: There is no option to select a sub-code in the dual channel
monitor menu. The sub-code is dictated by the sub-code that is
selected for that channel in the main sub-code menu setting. For
example: If the main channel setting for channel 5 is set to
sub-code 121, then that will be the sub-code used for the channel
5 dual channel monitor selection.
3. Press the PTT button to exit the menu.
In dual channel monitor mode, the display will alternate
between the main channel (and sub-code) setting and the dual
channel secondary channel.
In the case that a transmission is received on the secondary
dual channel monitor channel, any transmissions made within
10 seconds of receiving will be occur on the secondary
channel. Otherwise, all transmissions will be made on the main
channel and sub-code setting.
Setting High and Low Transmission Power
1. Press the
appears.
11
button until the dual channel monitor menu
to select which secondary channel to
button until the power selection menu "Pr"