Jumeler Le Caisson De Sous-Graves Au Transmetteur (Illustration) - Paradigm PDR Serie Mode D'emploi

JUMELER LE CAISSON DE SOUS-GRAVES AVEC LE TRANSMETTEUR
(Des détails additionnels sont disponibles dans la section texte Jumeler le caisson de sous-graves avec le transmetteur)
IMPORTANT! Le transmetteur et le caisson de sous-graves ne doivent pas être à plus de 50 pi (15 m) l'un de l'autre.
Panneau arrière du caisson de sous-graves
STATUS PAIR
STANDBY
Étape 1
is subject to the following two condition
and (2) This device must accept any i
cause undesired operation. Changes o
responsible for compliance could void t
Press Here to Pair
Dessous du transmetteur
Étape 3
7
PDR Series
STATUS
PRODUCT CONSUMES LESS
THAN 1 WATT IN STANDBY.
Manufactured Under License.
U.S. Patent # 5,075,634 and
5,510,753 Patent Pending
STANDBY
CONTAINS FCC ID: XXXXXXXXXXXXXX. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.
© Parad
Que signifie un clignotement des DEL sur le caisson de sous-graves et le transmetteur?
Clignotement lent = pas jumelé
Clignotement rapide = recherche de raccordement
Reste allumée = jumelé (raccordement établi entrele transmetteur et le caisson de sous-graves)
DC In +5v
Étape 2
STATUS PAIR
STANDBY
Étape 4
+ - Sub/Left In Right In
DEL du panneau avant
PDR Series
PRODUCT CONSUMES LESS
THAN 1 WATT IN STANDBY.
Manufactured Under License.
U.S. Patent # 5,075,634 and
5,510,753 Patent Pending
PAIR
CONTAINS FCC ID: XXXXXXXXXXXXXX. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS
SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION. CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY
RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.