Southland SEA438.1 Manuel De L'opérateur page 10

Routine Maintenance
• Save all instructions
C
Earth Blade and Fishtail Point:
WARNING
1. Use only the manufacturer's replacement part intended for this Auger Bit. Do not use any other Earth Blade or Fishtail
Point. To install any other brand part to this Auger Bit can result in serious personal injury. Replace worn or damaged
Earth Blade or Fishtail Point.
2. Auger blades and drilling points are sharp. Avoid contact with the auger bladed and drilling points while replacing or
sharpening and while installing auger bit, starting or transporting the unit.
1. Remove the mounting hardware (bolts and nuts), and
take off the earth blade (see Figure 7).
2. Install new Earth Blade with new mounting hardware.
3. Tighten the bolts to secure blade.
4. To Replace the Fishtail Point, unscrew the point using
an adjustable wrench to grip the side of the Fishtail
Point. Replace with new part (see Figure 8).
Questions? Call Toll Free at 1-800-737-2112
(Continued)
EN - 10
Copyright © 2015 MAT Engine Technologies, LLC
Fig.7
Fig. 8