Safety Definitions
• Save all instructions
Safety Warning Symbols:
Indicates Warning.
Read these instructions carefully.
Control and Operating Symbols:
Choke Control:
Cold Start
Run/Warm Start
Fuel Primer:
Press 6 times.
The information listed below should be read and understood by the operator. We utilize the symbols below to allow
the reader to recognize important information about their safety.
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
DANGER
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
WARNING
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or
CAUTION
equipment/property damage.
Questions? Call Toll Free at 1-800-737-2112
Fuel Mixture
50:1
Unleaded Gas: 2 Cycle Oil
Caution: Do Not Use Gas
Mix with More Than 10%
Methanol or Ethanol
ON
OFF
EN - 2
Copyright © 2015 MAT Engine Technologies, LLC
Extremely hot surface. Do not touch
a hot muffler, gear box or cylinder,
you may get burned. These parts
get extremely hot from operation and
remain hot for a short time after the
unit is turned off.
Fuel Mixture:
50:1
(Unleaded Gas : 2 Cycle Oil)
Ignition Switch:
ON
OFF