Prebena 9A-MGS-55 Notice D'emploi page 89

Symptom
Tool refuses to switch
on.
Operation without
fastening screws.
If you cannot clear the fault contact your dealer or the manufacturer
(see page 55).
Possible reason
Safety lock activated
ON/OFF switch
damaged.
Battery discharged
Damaged spring in the
tools head.
The feeding device is
dirty.
The magazine
contains the wrong
type of screws.
The feeding device is
not lubricated
sufficiently.
Incorrect bit inserted
Repairing faults
Solution
Push the rotation
direction switch up to the
stop.
or else inform customer
service (see page 45).
Disconnect the electrical
tool from the power
supply before starting
maintenance.
Inform customer service
(see page 45).
Replace battery.
Recharge the
rechargeable battery
pack
or else inform customer
service
(see page 45).
Inform customer service
(see page 45)
Clean the feeding device.
Empty the magazine
(see page 35).
Fill the magazine with
PREBENA screws
(MGS) (see page 42).
Clean the magazine
adapter.
Spry movable parts with
silicone spray.
Insert a bit matching the
screw
41