Transporting And Storing The Electrical Tool; Packing - Prebena 9A-MGS-55 Notice D'emploi

Transporting and storing the electrical tool

Transporting and storing the electrical
tool

Packing

Pack the electrical tool before you store it or before you transport it
over the following distances:
distances of more than 10 m
transporting the unit over unsafe ground
distances where you must move in an unusual stance.
Carry out the following preparatory steps:
Disconnect the battery charger from the power supply (see page
35).
Empty the magazine (14) (see page 35).
Activate the safety lock (see page 11) (see page 35).
Clean the ventilating slots (10) of foreign objects and dirt if
necessary.
Place the electrical tool and accessories in the carrying case.
Close the carrying case and the latches of the lid.
36