Operating Electrical Tools; Replacing A Bit - Prebena 9A-MGS-55 Notice D'emploi

Operating electrical tools

Operating electrical tools
Before you start, check whether the supply voltage and frequency
match the specifications on the type label of the battery charger.
Always use the Prebena rechargeable battery pack 9A for the auto
feed screwdriver.
Make certain that you observe the safety info contained pages 7.

Replacing a bit

The following conditions apply when replacing and inserting bits:
The size and the form of the bits must match the screw.
Worn bits must be exchanged.
26
CAUTION
The charger may be damaged if it is
connected to a power source that does not
comply with requirements shown above.
Only connect the battery charger to a
proper power outlet.
CAUTION
The auto feed screwdriver may be damaged if it
is used with a different battery pack.
Use only Prebena rechargeable battery
pack 9A to operate the auto feed
screwdriver.