Interrupting An Operation; Reloading The Magazine; Charging The Rechargeable Battery Pack - Prebena 9A-MGS-55 Notice D'emploi

Operating electrical tools
Press and hold switch (4) to fasten additional screws.
Place depth stop (16) on the next position.
Push the auto feed screwdriver down steadily and quickly.
The next screw is fastened.
You can repeat this process as long as you press the ON/OFF
switch with screws in the magazine and a charged battery pack.
To guarantee full power during quick fastening operations do
not switch the drive unit on and off but keep it switched on and
running continuously.

Interrupting an operation

You can suspend the auto feed screwdriver during short
interruptions. The belt clip (12) on the left of the tool has been
provided for this purpose.

Reloading the magazine

Refill the magazine as described on page 22.

Charging the rechargeable battery pack

Charge the battery pack as described on page 19.
34
CAUTION
Placing the depth stop on a work piece without
screws in the magazine can damage the
fastening surface.
Use the feeding device only when the
magazine has been filled.