When You Have Completed Your Work; Disconnect The Power Supply; Empty The Magazine; Activate The Safety Lock - Prebena 9A-MGS-55 Notice D'emploi

When you have completed your work

Execute the following steps when you have completed your work or
for extended interruptions.

Disconnect the power supply

Proceed as follows:
Disconnect the plug of the battery charger from the electrical
outlet.
Store and protect the charger in the carrying case.

Empty the magazine

You must remove unused screws from the magazine if you do not
want to continue using the electrical tool if you want to use different
screws.
Proceed as follows:
Pull the belt with the screws forward and out of tool head (15).

Activate the safety lock

Proceed as follows:
Place rotation direction reversal switch (11) in centre position.
The safety lock is active.
Store and protect the auto feed screwdriver in the carrying case.
When you have completed your work
35