Exhaust Pipe System; Spare Part List; Warranty; Italian - Munters GFn Mode D'emploi Et D'entretien

• loss of screw and/or fixing element because of
vibration during normal operation;
• damage of the protection mesh, screw and/or
fixing element due to damage caused by fork lift.
NOTE If these situations occur then, it is necessary
to replace the protection mesh and/or fixing element
so that the original safety requirements are ensured.
WARNING Do not allow the use of the air
heater with the protection mesh and/or fixing
element in need of repair.

7.9 Exhaust pipe system

Periodic maintenance of the exhaust pipe system is
essential for the proper and safe function of the air
heater. The user must check that the exhaust piping
system is working properly, safely and that it
complies with the laws in force. For more
information see Chapter 5.6.

8. SPARE PART LIST

Contact the manufacturer. Use only Munters spare
parts or such that are equivalent to the original parts
in design and quality. Non-compliance will exempt
the manufacturer from all liability and will void the

warranty.

9. WARRANTY
For Warranty information please refers to "General
terms and condition
https://www.munters.com/globalassets/terms-and-
policies/condizioni_generali_vendita.pdf
Conditions and Limitations:
• Products and Systems involved in a warranty
claim under the "General terms and condition of
sale" must have been properly installed,
maintained and
supervision, according
provided by Munters;
• Malfunction or failure resulting from misuse,
abuse, negligence, alteration, accident or lack of
proper installation or maintenance shall not be
considered a defect under the Warranty.
Requests for technical assistance and spare parts
must be made directly to the manufacturer, at the
following address:
Munters Italy S.p.A
Strada Piani, 2
of sale" available
operated under competent
to the instructions
18027 Chiusavecchia (IM), Italy
Tel: +39 0183 52 11
Fax: +39 0183 521 333
info@munters.it

ITALIAN

Manuale d'uso e manutenzione + Dichiarazione CE
di conformità
GFn - Generatore d'aria calda a gasolio
1. DICHIARAZIONE CE
DICHIARAZIONE DI CONFORMITÀ CE
(conforme al sottoparagrafo A Allegato II Direttiva
Con sede legale in Strada Piani 2 – 18027
Chiusavecchia (IM) – Italia (N. di registrazione della
dichiara sotto la propria responsabilità che
Descrizione
on
Modello
Anno di
fabbricazione
è conforme ai requisiti di sicurezza essenziali
previsti dalle direttive sulle apparecchiature
2006/42/EC, 2004/108/EC, 2006/95/EC,
con particolare riferimento alle seguenti disposizioni:
EN 12100,EN 13842, EN60529, EN 61000-6-2/-4,
EN 61000-3-2/-3, EN 60204-1, EN60335-1,
16 | © Munters AB, 2019
2006/42/CE)
Munters Italy S.p.A.
società: 00081050080)
l'apparecchiatura:
Generatore d'aria calda a gasolio
destinato a riscaldare fattorie, serre e
altre applicazioni agricole.
GFn
2015
2011/65/EU
EN60335-2-102+A1
Chiusavecchia, 8 Febbraio 2019
Massimo Colombo
Reppresentante legale