Furman ELITE-15 DM i Guide De L'utilisateur page 6

Connecting Components to the Linear Filtering Power Banks
The Elite-15 DM i's rear panel and front panel "Audio – Audio-Video Power Outlets" should be employed for any component not
connected to the "Video Component AC Outlets," These outlets still possess exceptional AC noise filtering to maximize system
performance. See 12V triggering below.
12V Triggering - Switching
The Elite-15 DM i's front panel and four of the rear panel mounted outlets are always on, once the front panel power switch
is engaged. The remaining eight rear panel outlets are labeled – switched, these require a 12 volt triggering device such as
that typically found in most power receivers and audio pre-amp processors. The input for the 12V trigger is a female mono
mini-phone jack. An additional product (such as a remote sub-woofer) can be daisy-chained from the 12V output jack for an
additional triggered unit.
For those who do not wish to utilize the 12V triggering, a convenient bypass push button switch is located adjacent to the
input and output jacks. By depressing this button, all outlets will operate when the front panel power switch is engaged.
WARNING: If the 12V bypass switch is not engaged, four of the outlets will not supply power until a 12V trigger is present! Any
primary control component such as a receiver with a master universal remote should be connected to an unswitched outlet! If
not, once the universal remote is turned off, there will be no way to restore power to the receiver via the remote control.
AC Voltage and Current Meters
Your Elite-15 DM i contains a combination precision incoming AC voltage meter, as well as a true RMS current meter. The first
meter (located towards the left of the front panel) continuously monitors the incoming AC voltage. The current meter located
to the right of the front panel, and will read your systems total AC current draw (+/- 0.1 amp typically, regardless of the AC
load).
Note:
For those that mount the Elite-15 DM i where it could be visible during use, we have included a rear panel mounted dimmer switch for
the blue voltage and current meters. This allows the user to dim these lights when the room lights are turned off for optimum video
viewing.
Suggested AC Connection
Telco Protectors (x2)
AC Cord
Cable / Satellite
Protectors (x3)
6
E -15 DM O '
litE i wnEr s
Dual Meter
Powered
Dimmer
Subwoofer
12V
Triggering
Audio Outlets
Device
Switched
Audio Outlets
Unswitched
Bypass for 12V
2 - 7 Channel
Triggering
Amplifier / Receiver
Device
M
anual
SACD Player/
CD Changer
Turntable
Audio/Video Outlets
Switched
Audio/Video Outlets
Switched
Audio Pre-Amplifier/
Processor
DVD/HD-DVD/
Blu-Ray Player /
or Player VCR or DVR
Video Outlets
Switched
Video Outlets
Unswitched
Satellite
Receiver/ Cable Box
Plasma/
LCD Monitor/
Projector