Power Switch - MC Crypt CDMPX-30 Notice D'emploi

6. Connections and control elements
(15) TIME button
This button switches between the different playing times display options.
elapsed track time > remaining track time > total remaining CD playback time
When playing back MP3 files, the total remaining playing time of the CD is not displayed.
(16) PITCH BEND + button
With this button you can temporarily increase the playback speed of the CD.
(17) PITCH button
With this button, you turn the PITCH function for the PITCH slider (20) on/off.
(18) PITCH BEND - button
With this button you can temporarily increase the playback speed of the CD.
(19) SEARCH button
This button switches the function of the JOG/SHUTTLE wheel (9). With the function SEARCH (button is lit), you
can search the track by turning the JOG/SHUTTLE wheel (9). If the button is not lit, turning the JOG/SHUTTLE
wheel (9) influences the playback speed.
(20) PITCH slide control
With the PITCH slider, you can change the playback speed. Pull the slider downwards to increase the playback
speed of the track. If you slide the control upwards, the playback speed is reduced. The corresponding change
in percent is shown on the display (10). If the slider is in the central position, the playback speed does not change.
The slider is only active if the pitch function was previously activated with the PITCH button (17).
(21) PLAY/PAUSE button
Use this button to start or temporarily stop (pause) the CD playback. During playback, the button is permanently
lit, during pause mode, it blinks.
(22) Audio output LINE OUT
The left and the right audio output signal of the CD player is played back on these cinch sockets. You can connect
the audio input of your mixing desk or amplifier to this.
(23)

Power switch

Turns the CD player or or off.
If the side with the dot is pressed, the device is activated.
(24) Mains connection AC IN
The supplied mains cable for the power supply is inserted here.
||
33