MC Crypt CDMPX-30 Notice D'emploi page 32

6. Connections and control elements
(8) Track jump forward button
With the track jump buttons, you can select any track on the CD. Press and hold the button to speed up the track
skip.
(9) JOG/SHUTTLE wheel
By turning this wheel in playback mode, you can search through the CD or influence the playback speed
(depending on the setting with the button SEARCH (19)).
In pause mode, you can directly access a certain spot on the CD.
(10) LC display
The LC (liquid crystal) display shows the most important settings and the CD play data.
(11) CUE button
If the CUE button is pressed briefly during playback, the CD player returns to the start of the track and goes into
PAUSE mode. If you keep the CUE button depressed, playback starts from the CUE mark. After letting go of the
CUE button, the CD player returns to the CUE mark and goes into pause mode.
(12) IN button
The device lets you save a „seamless" playback loop. For this purpose, the device features the button IN (12),
the button OUT (13) and the button RELOOP (14).
With the IN button, you program the starting point of the playback loop.
A detailed description of the „LOOP" function can be found under „Loop function" in one of the following
chapters in this manual.
(13) OUT button
The device lets you save a „seamless" playback loop. For this purpose, the device features the button IN (12),
the button OUT (13) and the button RELOOP (14).
With the OUT button, you program the end point of the playback loop or leave the playback loop by pressing it
once again.
A detailed description of the „LOOP" function can be found under „Loop function" in one of the following
chapters in this manual.
(14) RELOOP button
With this button, you call up a saved playback loop once again.
A detailed description of the „LOOP" function can be found under „Loop function" in one of the following
chapters in this manual.
32
|