Cornelius CANYON Instructions D'assemblage page 17

9
CAP EXTENSION
10
11
Snap the seat cap starting outside the top seat.
Then snap the other side inside the top seat.
Snap the plastic cap in the middle of the top seat if no light is used.
PLASTIC
CAP
TOP PLATE INSTALLATION
TOP PLATE
SCREW ''Z''
UPRIGHT
TOP SEAT INSTALLATION
SEAT CAP INSTALLATION
Install the top plate into the upright and secure with two (2) screws
''Z'' on each side.
Clip the cap extension into the upright.
Make sure it snaps into the upright.
Place the top seats on the top of the uprights ensuring that the rod
under the seat is inserted into the oblong holes in the top plate.
Be sure to have a vertical (plumb) upright
before fixing the top seat.
Evenly distribute the top seats all around
the pool.
Secure the top seat in place using four
(4) "Z" screws where indicated.
FIXE THE FRONT
HOOK FIRST
SEAT CAP
UPRIGHT