Display Source; Main Menu - Kodak RDPF-1020W Mode D'emploi

NOTE:
Do not force the memory card into the slot. If you are not able to insert the memory
•
card easily, you may have inserted it incorrectly; turn the card over and try again.
Do not remove a memory card immediately after inserting it or when the frame is
•
processing files. Wait until the screen is stable.
Maximum SD/MMC card size is 16GB; maximum USB flash drive size is 8GB.
•

Display Source

Insert a memory card or USB flash drive; after the card/drive is read, a slide show will start.
Press the EXIT Button to stop the slide show and enter thumbnail mode. Press the EXIT
Button again to access the main menu. Press the EXIT Button a third time to enter Source
Mode, in which you can select a photo source from the memory devices inserted into the
frame-- memory card, USB flash drive, or the frame's built-in memory. Press the
button to return to the main menu.
NOTE: The Digital Photo Frame may be slow to read some large capacity memory cards
and USB drives.

Main Menu

7