Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
V1.0
IDENTIFICATION KEY
A
Handle
B
Control lever
C
Pump lever/foot pedal
D
Locking swivel caster
E
Table
F
Safety bar
G
Base
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included
Parts List. Letter references in parenthesis (A) refer to the
included Identification Key.
Two people are recommended to remove the parts from the
packaging. The product is shipped with the base (G) connected to
the handle (A). Grip the base securely, while another person grips
the handle. Simultaneously lift or pull them away from the box.
1.
Slide the ends of the handle (#31) into the slots on the
base (#9) and secure each end with an M8x35 hex
bolt (#21).
2.
Attach the pump lever (#23) and foot pedal (#24) to the
connecting rod (#22) using an M8x35 hex bolt (#21).
OPERATION
1.
Lock the rear casters (D) prior to loading and unloading the
table. Press the levers on the casters with your foot until
they lock in place. Lift the levers to release the lock.
2.
Check the table's functionality by using the control
lever (B) and pump lever/foot pedal (C) to lift and lower
the table (E).
Visit www.princessauto.com for more information
500 LB HYDRAULIC LIFT TABLE CART
8662223
Fig. 1
7
Publicité
Table des Matières
