8662223
fluid in an approved metal safety can with a spring-closing
lid and venting designed to contain a fire.
7.
Hydraulic fluid has a combustible flash point of 200 °F
(93 °C). Do not expose the fluid to an ignition source.
INJECTION INJURY
DANGER! Seek immediate, professional medical treatment if
fluid penetrates your skin. It may feel like a pricking or sting.
Do not wait for the appearance of symptoms. A toxic reaction
can occur from the exposure. Delay in treatment can lead to
amputation or death.
Inform the medical staff that you have a fluid penetration injury
as soon as you arrive at the medical facility. The severity of the
symptoms will depend on the type of fluid injected. Bring the
Safety Data Sheet for the fluid with you to the medical facility
if possible.
INJECTION PRECAUTIONS
Fluid can penetrate the skin at 100 PSI pressure. Fluid escaping
under pressure from the tool has sufficient force to penetrate
your clothing and skin. Follow the precautions below to avoid
an injection injury.
1.
Always check for leaks wearing a face shield, safety
goggles, rubberized gloves and protective clothes.
2.
Do not use your hands to detect a fluid leak. Use a large
piece of wood, cardboard or paper and watch
for discolouration.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and inspect
for damage. Make sure that all items in the parts list are included.
6
500 LB HYDRAULIC LIFT TABLE CART
For technical questions call 1-800-665-8685
V1.0