PRO-POINT 8662223 Manuel D'utilisateur page 10

8662223
STORAGE
1. Set the table on the lowest position while not in use. Store
in a dry location to prevent corrosion.
2. When not in use for an extended period, apply a thin coat
of lubricant to the steel parts to avoid rust. Remove the
lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
DISPOSAL OF HYDRAULIC FLUID
Do not drain hydraulic oil into the sewer system or dispose in
an uncontrolled location. Hydraulic fluid may take up to a year
to break down in the environment and the ingredients may still
be toxic. Contact your local municipality for proper disposal
instructions or locations.
TROUBLESHOOTING
Visit a Princess Auto Ltd. location for a solution if the tool does
not function properly or parts are missing. If unable to do so,
have a qualified technician service the tool.
PROBLEM(S)
The table is
not lowering.
The control
lever is rigid.
10
500 LB HYDRAULIC LIFT TABLE CART
POSSIBLE CAUSE(S)
The pull rod (#32) is
disconnected from
the bolt (#35).
The hex nut (#25) is
too tight.
For technical questions call 1-800-665-8685
SUGGESTED SOLUTION(S)
Reconnect the pull rod to
the bolt.
Loosen the hex nut and
adjust the bolt (#35).
V1.0