IFM Electronic AC008A Notice De Montage page 6

outputs
3 4
5
2 1
Socket M12
Switching output +
External power -
not connected
LED green auxiliary voltage
Addressing
Assign a free address between 1 and 31. At the factory the address is
set to 0.
Addressing with the adressing unit AC1144
If it is used with the FC-E lower part AC5003 the module must first be
addressed via the addressing unit AC1144 and then mounted onto the
lower part.
Infrared addressing
The AS-i module also offers the option of infrared addressing with the
addressing unit AC1144.
The AS-i communication (yellow cable) must be switched off
during the infrared addressing.
Supply the slaves with voltage via the AS-i power supply. Addressing is
carried out via the IR addressing cable E70211.
When the ifm AS-i power supplies type SL are used the communica-
tion can be deactivated via a plug on the power supply. To do so, dis-
connect the master.
6
PAGE
4x LED1 yellow
pin
4
3
1,2,5
LED2 red FAULT
fixture
infrared
adapter
LED green
PWR sensor
supply o.k
4 sockets
M12