Klarstein FULL HOUSE 2.0 Mode D'emploi page 65

Problem Possible causes
Fan noise com- A cooling fan built into your
ing from the induction hob has come on to
induction hob. prevent the electronics from
overheating. It may continue to
run even after you've turned the
induction hob off.
Pans do not 1. The induction hob cannot
become hot. detect the pan because it
is not suitable for induction
cooking.
2. The induction hob cannot
detect the pan because it
is too small for the cooking
zone or not properly
centred on it.
The induction Technical fault.
hob or a
cooking zone
has turned
itself off
unexpectedly, a
tone sounds and
an error code is
displayed.
What to do
This is normal and requires
no action. Do not disconnect
the power to the induction
hob while the unit's fan is still
running.
Use cookware suitable for
induction cooking. Centre the
pan and make sure that its base
matches the size of the cooking
zone.
Please note down the error
letters and numbers, disconnect
the power to the induction
hob and contact a qualified
technician.
EN
65