Klarstein FULL HOUSE 2.0 Mode D'emploi page 55

When „U" or „_" flashes on the screen together with the heat setting, it means that:
• there are no cookware on the selected hob or
• the cookware you are using is not suitable for induction or,
• the cookware is either too small for the hob or is not in the centre of the hob.
Note: Heating will not start until suitable cookware is placed on the hob. If no
suitable cookware is placed on the hob, the appliance will automatically switch off.
Ending the cooking process
1
Touch the button on the
hob that you want to
switch off.
3
Switch off the entire hob
by pressing the On/Off
button.
Turn off the corresponding hob by sliding your finger to
the left over the control until the screen displays „0".
Be especially careful when the screen displays „H", as
the hob will still be hot. When the hob has cooled down
and can be touched without risk of burns, the display
goes out. You can also use this to save energy, as it
helps keep pots warm.
2
4
EN
55