Parameter Setting - MICRADIGITAL F5D7630ea4A-E Manuel De L'utilisateur

Parameter Setting

Select your Country and Internet Service Provider. This will automatically
configure the Wireless ADSL Router with the correct Protocol, Encapsulation
and VPI/VCI settings for your ISP.
Note: If your Country or Internet Service Provider is not listed you will need
to manually enter settings. See "Parameter Setting - Country or ISP
Not Listed" on page 28.
If your ISP uses Protocols PPPoA or PPPoE you will need to enter the
username, password and DNS Server address supplied by your ISP.
If your ISP uses Protocol RFC1483 Routed you will need to enter the IP
address, Subnet Mask, Default Gateway and DNS Server address supplied by
your ISP.
Note:
By default 192.168.2.1 is set for the DNS Server address, this needs
to be changed to reflect your ISP's DNS address.
Click NEXT to continue.
27