Isp Settings; Connect The System; Connect The Adsl Line - MICRADIGITAL F5D7630ea4A-E Manuel De L'utilisateur

ISP Settings

Please collect the following information from your ISP before setting up the
Wireless ADSL Router:
• ISP account user name and password
• Protocol, encapsulation and VPI/VCI circuit numbers
• DNS server address
• IP address, subnet mask and default gateway (for fixed IP users only)

Connect the System

The Wireless ADSL Router can be positioned at any convenient location in
your office or home. No special wiring or cooling requirements are needed.
You should, however, comply with the following guidelines:
• Keep the Wireless ADSL Router away from any heating devices.
• Do not place the Wireless ADSL Router in a dusty or wet environment.
You should also remember to turn off the power, remove the power cord
from the outlet, and keep your hands dry when you install the Wireless ADSL
Router.

Connect the ADSL Line

Connect the supplied RJ-11 cable from the ADSL Microfilter/Splitter to the
ADSL port on your Wireless ADSL Router. When inserting an ADSL RJ-
11 plug, be sure the tab on the plug clicks into position to ensure that it is
properly seated.
9