Configuring Client Pc; Tcp/Ip Configuration - MICRADIGITAL F5D7630ea4A-E Manuel De L'utilisateur

Configuring Client PC

After completing hardware setup by connecting all your network devices, you
need to configure your computer to connect to the Wireless ADSL Router.
See:
"Windows 2000" on page 14
"Windows XP" on page 17
or
"Configuring Your Macintosh Computer" on page 19 depending on your
operating system.

TCP/IP Configuration

To access the Internet through the Wireless ADSL Router, you must configure
the network settings of the computers on your LAN to use the same IP subnet
as the Wireless ADSL Router. The default IP settings for the Wireless ADSL
Router are:
IP Address: 192.168.2.1
Subnet Mask: 255.255.255.0
Note: These settings can be changed to fit your network requirements, but
you must first configure at least one computer to access the Wireless ADSL
Router's web configuration interface in order to make the required changes.
(See Advanced Management Guide for instruction on configuring the Wireless
ADSL Router.)
13