Siemens 3RK1904-2AB01 Instructions De Service page 14

Slaves without parameter string, e.g. digital slaves
Select a new parameter value.
The hex value blinks on the main display.
888
↵ Transfer the parameter to the slave.
Changed parameters which have been transferred to the slave can be deleted with
clr0 after setting the rotary selector switch to Memory.
echoXH: The received parameter echo is displayed in hexadecimal format.
888
Memory memo: Loading, saving, deleting and copying data records
All addresses included within a system which has been saved to memory can be
transferred to the individual slaves for a new system, one after the other, in the "copy"
operating mode.
ESC Display of the available memory capacity in %.
↵
Deleting data records
clear
888
Delete contents of memory address 0 (RAM), or memory address 1, 2, 3 or 4, or ALL
(0 through 4).
Loading data records
recall
888
Load the contents of memory address 1, 2, 3 or 4 to memory address 0 (RAM).
Saving data records
store
888
Save contents of memory address 0 (RAM) to memory address 1, 2, 3 or 4.
Copying slave addresses
copy
888
cpyx
Connect the slave via the addressing plug. The corresponding address of the connected
slave blinks on the display.
setto
clradr
addresses have been transferred.
ESC: If several slaves are to be programmed with the same profile, this address is not
deleted from the address field.
ready: Prompts user to select next slave.
14
www.gkbpx.com
clrx
rclx
stox
cpyx ready
: Copy all addresses from memory address x.
: Start transfer of the address.
: Delete the slave displayed in the address field. empty appears after all
setto clradr
3RK1703-2WB02-1CA1
该文档是极速PDF编辑器生成，
如果想去掉该提示,请访问并下载：
http://www.jisupdfeditor.com/
or ESC