Element Cycling; Operating The Cooking Elements; Adjust Burner Size - Cafe CEP9030 Manuel Du Propriétaire

Radiante table de cuisson
Masquer les pouces Voir aussi pour CEP9030:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Element Cycling

Surface elements will cycle on and off to maintain the
temperature you have selected. All radiant surface elements
have a temperature limiter that protects the glass cooktop
from getting too hot, this is normal. The temperature limiter
may cycle the elements off more frequently if:

Operating The Cooking Elements

Turn Burner(s) On: Touch and hold On/Off pad about
half a second. A chime can be heard with each touch to
any pad.
Power level can be selected in any of the following ways:
1. Swipe the gray arc (on the graphics) to the desired
power level. There is no sensor on the LEDs, or;
2. Touch Anywhere along the gray arc, or;
3. Touch + or - pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit on, touch
the + pad, or;
5. Shortcut to Low: Immediately after turning unit on,
touch the - pad.

Adjust Burner Size

The burner ring size is adjustable on some elements.
The ring size can be selected by pressing the burner
ring graphic.
8
Gray Arc Swipe Area
Lights
Single Surface
Element
Gray Arc
Swipe Area
Tri-Ring Surface
Element
Element
49-80833

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Cep9036Cep90302nssCep90301nbb

Table des Matières