Setting The Timer To Turn More Than One Cooking Zone Off - amzchef YL-IT7008S-2B1B4B Manuel D'instructions

minutes.
If the setting time exceeds 99 minutes, the timer will automatically return to 0
minute.
4. When the time is set, it will begin to count down immediately. The display
will show the remaining time and the timer indicator flash for 5 seconds.
NOTE: The red dot next to power level indicator
will illuminate indicating that zone is selected.
5.
To cancel the timer, touch the heating zone selection control, and then touch the "Timer",
the timer is cancelled, and the "00" will show in the minute display, and then "--".
6.
When cooking timer expires, the corresponding cooking zone will
be automatically switch off and show "H".
Other cooking zone will keep operating if they are turned on previously.

Setting the timer to turn more than one cooking zone off

1. If use this function to more than one heating zone, the timer indicator will show the
shortest time.
(e.g. zone 1# setting time of 3 minutes, zone 2# setting time of 6 minutes, the timer
indicator shows "3".)
NOTE: The flashing red dot next to power level indicator means the timer indicator is
showing time of the heating zone.
If you want to check the set time of other heating zone, touch the heating zone selection
control. The timer will indicate its set time.
(set to 6 minutes)
(set to 3 minutes)
20