Using The Boost - amzchef YL-IT7008S-2B1B4B Manuel D'instructions

Make sure the power display shows "0", then shows "H".
3. Turn the whole cooktop off by touching the ON/OFF control.
4. Beware of hot surfaces
'H' will show which cooking zone is hot to touch. It will disappear when the surface has
cooled down to a safe temperature. It can also be used as an energy saving function if
you want to heat further pans, use the hotplate that is still hot.

Using the Boost

Boost is the function that one zone rising to a larger power in one second and lasting for 5
minutes.Thus you can get a more powerful and faster cooking.
Using the Boost to get larger power
1. Touch the heating zone selection button that you wish to boost, an
indicator next to the key will flash.
2. Touch the Boost button, the heating zone will begin to work at Boost mode. The power
display will show "P" to indicate that the zone is boosting.
3. The Boost power will last for 5 minutes and then the zone will go back to the power stage
which was set before boost.
4. If you want to cancel the Boost during this 5minutes, touch the heating zone selection
button, an indicator next to the key will flash. And then touch the Boost button. The heating
zone will go back to the power stage which was set before boost.
and then
16