Shockwave Medical 825D Manuel D'utilisation page 11

EN
Step
Picture or additional info if applicable
Step 2 – Confirm Battery Capacity
With the Generator is powered on, the BATTERY CAPACITY will be
shown in the right side of the display. The battery symbol should be at
least partially filled as shown.
If the battery symbol is empty, additional charging of the battery is
recommended before use because there may not be an adequate
charge to complete a patient treatment.
Step 3 – Check Diagnostics
Confirm that the display is as pictured with no error messages
displayed. If an error message is displayed, refer to Troubleshooting,
Section 7.0.
Normal display with no errors
If a yellow light is displayed, refer to Troubleshooting, Section 7.0.
If any error messages come on during use, refer to Troubleshooting,
Section 7.0.
Error Condition – Catheter error shown
LBL 60780 rev. B 11 | P a g e