Nikon WP-AA1 Manuel D'utilisation page 21

Adding a battery
You can add a battery.
1
Insert the battery to the additional battery
case.
With the positive and negative terminals oriented
correctly, insert the battery until the latch holds it firmly
in place.
Be careful not to wet or touch the power terminal as it
may cause a malfunction.
2
Insert the additional battery into the
additional battery case storage unit of the
waterproof case.
If you wet or touch the battery pin frame, it may cause a
malfunction.
To remove the battery, pull the latch outward and push
up through the opening on the bottom of the
additional battery case.
C
Recording in high-temperature conditions
Recording may stop if the camera becomes hot when using it in high-temperature
conditions, even if the battery is sufficiently charged.
Specifications
Maximum water depth
Camera operating
temperature
Dimensions (W x H x D)
Weight
The waterproof performance of the WP-AA1 Waterproof Case is equivalent to JIS/IEC
waterproof class 8 (IPX8). It is confirmed that water will not enter the waterproof case
if held underwater at depths up to 40 m for up to 30 minutes.
Nikon will not be held liable for any errors this manual may contain.
The appearance of this product and its specifications are subject to change
without notice.
10
40 m (131 ft)
-10°C– +40°C (14°F–104°F) (for land use), 0°C–40°C (32°F–
104°F) (for underwater use)
Approx. 90.2 × 80.3 × 48.8 mm (3.6 × 3.2 × 2.0 in.)
(excluding projections)
Approx. 133 g (4.7 oz) (excluding battery and camera)
Latch
Battery pin frame