Safety Precautions - Pioneer PDK-TS07 Mode D'emploi

Thank you for buying Pioneer's product.
¶ To ensure that you use the product properly and safely, be
sure to read the following Safety Precautions before use.
¶ To ensure that you are able to make the fullest possible
use of this product, be sure to read this manual in full.
¶ After reading this manual, store it in a location where it will
always be available for further use.
This product is Pioneer 42 inches Plasma Display (PDP-
425CMX / PDP-42MXE10 / PDP-42MXE10-S), 43 inches Plasma
Display (PDP-433CMX / PDP-433MXE / PDP-434CMX / PDP-
43MXE1 / PDP-43MXE1-S), 50 inches Plasma Display (PDP-
503CMX / PDP-503MXE series / PDP-504CMX / PDP-50MXE
series / PDP-505CMX / PDP-507CMX).
For detailed information on how to attach these speakers to
any other monitor, contact the retailer where you purchased
the product for assistance.
Installation
¶ Consult your dealer if you encounter any difficulties with
this installation.
¶ Pioneer is not liable for any damage resulting from
improper installation, improper use, modification, or
natural disasters.
IMPORTANT NOTICE
Record the model number and serial number of this
equipment below.
Model No. PDK-TS07/PDK-TS01
Keep these numbers for future use.
CAUTION
This symbol refers to a hazard or unsafe practice which
can result in personal injury or property damage.
Serial No.

Safety Precautions

Do not install or modify the product other than specified.
Do not use this stand for a Plasma Display other than those
designated and do not modify it or use it for other
purposes.
Improper installation is extremely dangerous because it
may result in it falling over or other accident.
Installation Location
• Select a location that is strong enough to support the
weight of the stand and the displays.
• Make sure to place it in a level and stable location.
• Do not install it outdoors, at a hot spring, or near a beach.
• Do not install the stand where it may be subjected to
vibration or shock.
Assembling and Installation
• Assemble the stand in accordance with the assembly
instructions and securely attach all screws at the
designated locations.
There have been cases where unforeseen accidents
such as the equipment breaking or falling over
occurred after the installation of the display because
the stand was not installed as instructed.
• The display must always be installed by two or more
people to assure it is installed safely.
• Before installation, turn off the power for the display
and peripheral devices then remove the power cord
plug from the power outlet.
Prevent accidents caused by the product falling over by
taking reliable measures to prevent it from falling over (see
Page 10).
7
En