Display Settings - Abus TVIP81000 Manuel Utilisateur

11.3.5.1 Display Settings

You can use this menu item to set the picture quality of the Speed Dome, including brightness, sharpness,
contrast and so on. Click on "Default" to restore the default values.
Please note:
The display setting parameters can vary depending on the model.
Brightness
Image brightness settings. A value between 0 and 100 can be set.
Contrast
Image contrast settings. A value between 0 and 100 can be set.
Saturation
Image saturation settings. A value between 0 and 100 can be set.
Limit Gain
Setting for the maximum limit gain. A value between 0 and 100 can be set.
Sharpness
Image sharpness settings. A higher sharpness value can increase image noise.
A value between 0 and 100 can be set.
Focus Mode
For the focus mode, the options "Auto", "Manual" and "Semi-auto" are available.
112
English