Basic1 - Abus TVIP81000 Manuel Utilisateur

English

11.3.4.1 Basic1

Basic Parameter
Enable Proportional Pan
Activate this function to adjust the swivel / tilt speed to the respective zoom level. With a high zoom level,
the swivel / tilt speed is lower to that the picture does not move too quickly in the live view.
Enable Preset Freezing
If this function is activated, in the live view, the camera switches directly from one scene defined by preset
to an other. The areas between are not displayed to ensure monitoring remains efficient. This can reduce
broadband usage in the network.
If a pattern is called, preset freezing is deactivated.
Preset Speed
You can select a predefined preset speed of between 1 and 8 here.
Keyboard Control Speed
You can adjust the response speed using the control desk. You can choose between "Low", "Normal" and
"High".
Auto Scan Speed
The Speed Dome camera has five different scanning modes: auto scan, tilt scan, frame scan, random
scan and panorama scan. A value of between 1 and 40 can be set as the scanning speed.
PTZ OSD
Zoom Status
Set the display duration for the zoom status here. You can select from between 2 seconds, 5 seconds, 10
seconds, "Always Close" and "Always Open".
PT Status
Set the display duration for the azimuth angle during swivelling and tilting here.
You can select from between 2 seconds, 5 seconds, 10 seconds, "Always Close" and "Always Open".
105