Product Description; First Steps - Dörr SLIM LED VIDEOLICHT SVL-112 PRO Notice D'utilisation

02 | PRODUCT DESCRIPTION

·
Ultra-flat LED continuous light for photo and video recordings
·
For DSLR, DSLM & camcorder with hot shoe mount
·
Brightness dimmable in 5% steps
·
High-grade aluminum housing, with clear structured LED display
·
Supplied with universal flash shoe with ¼" tripod socket, USB-C charging cable, diffusor plate, honeycomb, storage pouch
03 | NOMENCLATURE
01 ¼" Connection thread
02 LCD display
03 On/Off/Menu button
04 Toggle switch +/- for adjustments
05 USB-C „5V in" charging socket
06 LED surface
07 Diffusor plate
07a) Holder for diffusor plate
08 Honeycomb
09 USB-C charging cable
10 Universal flash hot shoe
10a) Locking screw
11 Storage pouch

04 | FIRST STEPS

CAUTION: Before first use please tear off the protective film from the LED surface (06)!
Charging the internal Li-Polymer battery
Before first use, please fully charge the built-in Li-Po battery. Connect the USB-C charging cable (09) with the USB-C „5V in" charging
socket (05) of the video light. While charging you will see the actual charging status on the LCD display (02):
After charging, remove the USB-C charging cable (09) from the video light and the USB charging source. When the battery is totally
empty, the charging time by PC is about 2 ½ hours.
NOTE: If LED video light is not in use for a long period of time, we recommend charging the battery to about 60% to avoid
deep-discharge of battery.
9 doerr-foto.de