Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
02 | PRODUCT DESCRIPTION
·
LED selfie dual ring light for optimal illumination from two sides
·
3 light modes: cold light, mixed light, warm light
·
Brightness can be dimmed in 10 steps
·
With variable smartphone holder and useful table clamp
03 | NOMENCLATURE
01 2x Gooseneck with LED ring light
02 Gooseneck with smartphone holder
03 Smartphone holder
04 Table clamp
05 USB cable
06 USB-A plug
07 Control unit
08 Button +
09 Button –
10 Shift button colour temperature
11 On/Off button
04 | MOUNTING
1.
Fix the table clamp (04) to a table or similar object (maximum opening of table clamp approx. 5,5cm).
2.
Connect the USB-A plug (06) to a PC/Notebook.
3.
Slide the clamps of the smartphone holder (03) apart, insert your smartphone and release the clamps of the smartphone holder
carefully (03) to fix the smartphone.
4.
Use the flexible goosenecks (01 + 02) for the perfect position and angle of the lights or the correct angle of the smartphone.
05 | OPERATION
1.
To switch on the ring lights, press the On/Off button (11).
With the shift button for colour temperature (10) you can switch between warm light (approx. 3.800 K), cold light (approx.
2.
6.800 K) and mixed light (approx. 4.500 K).
3.
Press the button – (09) to reduce the brightness in 10 steps.
Press the button + (08) to increase the brightness in 10 steps.
4.
After use, switch the ring light off with button On/Off (11) and disconnect from USB power source.
8
doerr-foto.de
Publicité
Table des Matières
