Kimex 031-2200K2 Instructions De Montage page 12

• Tighten the safety screws found on the bottom of
each bracket to secure the TV to the stand.
• Use the bubble level to check if the display is even.
Note: Leave at least 1mm gap between screens.
8. Assemble the Equipment Shelf
Attach the Support Brackets(N) and (M) to the
backside of the Equipment Shelf(F).
N
9
√
X X
W
M
F
• Insert 2 Sliding Nuts(I) into the top slot of the bottom mounting rail and



2 in the 2nd from top slot as shown.
• Position the nuts next to the
support brackets as shown in the right figure.
• Fix the nuts using Screws(V).
• Attach the End Caps(S) to the ends of the bottom rail.
9. Attach the Camera Shelf to the Stand
G
• Insert 2 T-slot Nuts(O) into the backside of the top rail as shown.
• Attach the camera shelf to the top rail using Screws(V).
S I
V
Y
H
O
V
10