Using Your Goal Zero Yeti; How To Use; Best-Use Strategy - GOAL ZERO YETI 1500X Mode D'emploi

NOTE: If you are inputting from solar panels into multiple ports you can only combine inputs
if the panels being used are the same voltage. Panels that output different voltages will not
be able to combine through different ports. If you are using panels with different voltages
into two or more of the input ports, the Yeti will select the single highest solar input available.
Also, solar and AC inputs will not be able to be combined. If you are inputting from both a
solar panel and a wall outlet the Yeti will select the higher of the two inputs.

Using your Goal Zero Yeti

How to use your Goal Zero Yeti:
1. Press the power button located above each port you will be using. **When not
using certain ports, make sure to turn them off to conserve power.
2. You'll know the port is turned on when the white LED light on the button is
illuminated.
3. Plug in your gear for power anywhere life takes you.
4. If possible, keep your Goal Zero Yeti plugged into a power source when not in use.
5. You can charge your Goal Zero Yeti, and run your gear at the same time.

Best-Use Strategy:

When charging gear with your Goal Zero Yeti, take note of the BATTERY DISPLAY. If you plug in
devices that have a high power requirement (a large refrigerator), the charge level of your Goal
Zero Yeti can drop very quickly and you may not get exactly 1500Wh of capacity. Also, especially
when using the AC power output, the Goal Zero Yeti will be converting the energy from the DC
power of the battery to the AC power needed by your device. Although your Goal Zero Yeti has
a highly efficient inverter, there is still some energy lost in the conversion and you will not get the
full rated capacity of the battery. If you're experiencing shorter runtimes, you may want to check
the device's power requirements, see TROUBLESHOOTING for help.
7