GROLAB GRONODE HW03 Manuel D'installation page 7

Insert a coin cell ba ery* into Insert a coin cell ba ery* into
the GroNode's ba ery holder t
(10) with the posi ve pole at (
the top and the nega ve on t
the bo om. t
Place the ba ery cover (15) on the ba ery
holder (10) then insert the screws (16)
without exceeding its ghtening.
10
In case of loss of power, this ba ery ensures
that the GroNode's internal clock con nues to
operate.
Remove the ba ery if you plan to keep the
GroNode disconnected for a me longer than
a week.
NOTICE: If the GroNode does not start up or it is constantly
reboo ng it may be due to low ba ery, please remove the ba ery
or replace it. Ba ery should not be disposed of in the household
waste but sent for recycling.
*CR2032 3V 250mAh
15
16
10
16
EN
ES
FR
6