Configuration - GROLAB GRONODE HW03 Manuel D'installation

Masquer les pouces Voir aussi pour GRONODE HW03:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If the connec on between the GroNode
If the connec on between the GroNode
EN
module and your networking device was
module and your networking device was
correctly established, a yellow Led will light up.
correctly established, a yellow Led will light up.
ES
A green one will light up on the GroNode's
A green one will light up on the GroNode's
E
Ethernet port.
FR
If the module has been correctly connected to
If the module has been correctly connected to
the power and the logo (9) is lit in green, but
the power and the logo (9) is lit in green, but
the Ethernet port LEDs do not light up (a er
the Ethernet port LEDs do not light up (a er
following the steps to connect it to your
following the steps to connect it to your
router), there may be a network connec on
router), there may be a network connec on
p
problem. Contact our technical services.

CONFIGURATION

S
So ware installa on
Open the USB Pendrive (17), insert it in your
Open the USB Pendrive (17), insert it in your
computer and run the installa on program.
c
It is possible that your opera ng system will
It is possible that your opera ng system will
s
show an unknown so ware safety message.
9
17
2
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gronode hw04Gronode hw05

Table des Matières