GROLAB GRONODE HW03 Manuel D'installation page 13

COMMUNICATIONS
G GroNode Control
Using the so ware, access the module's Using the so ware, access the module's
management panel by clicking the Modules m
icon on the le -hand menu. i
Connect each of the modules to the power Connect each of the modules to the power
supply. You can add up to a total of four supply. You can add up to a total of four
modules of each type for each GroNode. m
In a few seconds, GroNode will detect your In a few seconds, GroNode will detect your
modules. Check the GroLab tutorials* to learn modules. Check the GroLab tutorials* to learn
h how to set your modules.
*GroLab tutorials are available inside the USB pen drive or at opengrow.pt/tutorials.
3
EN
ES
FR
s
12