Technical Data - Caframo BDCMN003 Mode D'emploi

Technical Data

Speed Range
Speed Readout Accuracy
Maximum Torque
Torque Readout Accuracy
Voltage
Installation Category
(in accordance with IEC664)
Maximum Current Draw
Maximum Output Power
Weight
Maximum Volume
Maximum Viscosity
Housing
IP Rating
Keypad
Power Cord Length
Chuck
Chuck Guard
Support Rod
Drive
Through Shaft
BDC1850: 12-1800 rpm
BDC3030: 20-3000 rpm
BDC6015: 40-6000 rpm
+/- 1 rpm or +/- 1% of reading
BDC1850: 580 Ncm (821 in-oz)
BDC3030: 350 Ncm (496 in-oz)
BDC6015: 175 Ncm (247 in-oz)
+/- 12 Ncm (1 in-lb) or +/- 5% of reading
110-240 VAC, 50/60 Hz
+/- 10% of the nominal voltage
II
2.6 Amps
1/5 hp, 150 Watts (BLDC Motor)
5 kg (11 lbs)
BDC1850: 80 L (21 Gal)
BDC3030: 60L (15.5 Gal)
BDC6015: 25 L (6.5 Gal)
BDC1850: 90,000 cP
BDC3030: 50,000 cP
BDC6015: 20,000 cP
Cast aluminum, epoxy coated
TENV (totally enclosed non-ventillated)
IP 4X
Sealed, chemical resistant
150 cm (5 ft) from stirrer to locking connector
50 cm (1.5 ft) from locking connector to plug
Fits 13 mm (33/64 in) dia output shaft of stirrer
Opens to 10 mm (3/8 in)
Length 67 mm, (2.64 in)
Diameter 54 mm, (2.13 in)
Molded clear chemical resistant polyurethane
12.7 mm (0.5 in) dia
140 mm (5.25 in) long
2 speed transmission
Accepts mixing shafts up to 10 mm dia (3/8 in)
6