Publicité
Les langues disponibles
Les langues disponibles
User Manual
Specification
▪
Interface Standard: HDMI 1.3
▪
Supported Bandwidth: 6.75Gbps
▪
Maximum Resolution: 1920x1080@60Hz 4:4:4 8bit
▪
HDCP Support: 1.4
▪
EDID Pass Through: Pass-through
▪
Supported Audio: LPCM 2CH
▪
IR Support: 20-60kHz
▪
Transmission Medium: IEC C6
▪
Chipset: ITE
▪
Housing Material: Metal
▪
Operating Temperature: 32°C - 104°C (90°F - 219°F)
▪
Storage Temperature: -4°C - 104°C (25°F - 219°F)
▪
Humidity: 20 -90% RH (non-condensing)
▪
Power Requirements: 100-240VAC 50/60Hz
Power Consumption: Transmitter – 3.4W, Receiver – 3.5W
▪
▪
Colour: Black
Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge)
▪
Connectors
▪
Transmitter Input: HDMI Type A (Female)
▪
Transmitter Output: HDMI Type A (Female), 3.5mm IR (Female), IEC C6 (Male)
▪
Receiver Input: 3.5mm IR (Female), IEC C6 (Male)
▪
Receiver Output: HDMI Type A (Female)
▪
Power: IEC C6 (Male)
Product Diagram
Transmitter
Power LED: This LED will illuminate when transmitter is connected to a power source.
Link LED: The LED will flash quickly to indicate pairing has been successful. This LED will illuminate
intermittently 3 times to indicate pairing has been unsuccessful.
Reset Button: Push for 3 seconds to reset the transmitter to default settings.
240VAC: Connect to a 100-240VAC power source using the included AC cable.
HDMI Out: Connect to a local HDMI display.
HDMI In: Connect to an HDMI source device.
IR Out: Connect the IR emitter cable for control of the HDMI source device and place the IR eye in clear
line of sight of the source device's IR receiver.
English
Publicité
